4-3/5"inch Fiber Glass Backing Abrasive Flap Disc

Abrasive Flap Disc: 1.AO - Abrasives Cloth 2.Stable Performance 3.Fiberglass Backing 4.Used for Metal

Flap discs are designed with abrasive cloth strips glued on to a rigid backing in a fan arrangement. Flap discs can replace in many operations, both grinding wheels and fibre discs. It is possible by using flap discs to cut and finish in one operation. The unique construction allows for new grain to be constantly in contact with the surface, as the flaps continually wear out. The life of a flap disc can be 20 times that of a fibre disc, resulting in a major cost reduction in both labor and material costs. A new heavy-duty product is available which gives high performance for weld removal on corners, flame cut edges, heavy deburring and cleaning of spot welds.

When removing the left over metal from the joint area, the motion of the grinder is the same as when using the rough grinding disc. Press the face of the disc into the work and work evenly around the tubing until it appears flush with the head tube shell.

 Applicable scope:

The flat emery cloth wheel is installed on a portable angle grinder to meet all kinds of requirements in industrial processing.

such as: grinding metal surfaces, removing weld, rough edge, joints and rust, ect.

Features:

1.working life is long.

2.speedy heat dissipation, will not burn the work piece.

3.high-quality of degree of finish.

4.high quantity of grinding.

    1) Aluminum oxide: A      2) Calcined alumina oxide: XA       3) Zirconia: ZA 

4-3/5"inch Fiber Glass Backing Abrasive Flap Disc